RGB-Pi SCART Instalación

From RGB-Pi Wiki
Revision as of 20:18, 18 June 2021 by ATG (talk | contribs) (Created page with ""Pasos"")
Jump to: navigation, search
Other languages:
English • ‎español

"Pasos"

1. Conecta el cable al GPIO. El cable tiene que mirar hacia el exterior de la Raspberry Pi

Cable.jpg

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.

Psu2.png

3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation
Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=RGB-Pi_SCART_Installation/es&oldid=40755"