Difference between revisions of "RGB-Pi SCART Installation/es"
(Created page with "{| |- |1. Conecta el cable al GPIO. El cable tiene que mirar hacia el exterior de la Raspberry Pi 320px|border |- |2. We recommend the use of [https://rover...") |
(No difference)
|
Revision as of 20:17, 18 June 2021
Steps
1. Conecta el cable al GPIO. El cable tiene que mirar hacia el exterior de la Raspberry Pi |
2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too. |
3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation |