Difference between revisions of "RGB-Pi SCART Installation"

From RGB-Pi Wiki
Jump to: navigation, search
m (Protected "Instrucciones de instalación Scart" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Available in English and Spanish / *Disponible en Ingles y Español*
+
'''Steps'''
 
 
'''RGB-Pi Scart installation instructions'''
 
  
 
{|
 
{|
|Steps:
 
|-
 
|1. Connect the cable on the GPIO to the outside of the Raspberry Pi
 
|-
 
|2. Download the latest version of the operating system from rgb-pi.com
 
|-
 
|3. Format one 8GB or bigger microSD in Fat32
 
|-
 
|4. Download Etcher from etcher.io to write the image in the SD
 
|-
 
|5. Burn the image WITHOUT DECOMPRESSING in the SD and EXTRACT WITH SAFETY
 
|-
 
|6. We can already put the SD in the Pi and connect to the TV
 
|-
 
|}
 
 
---------------------------------------------------------------------------------------------------------
 
 
'''RGB-Pi Scart instrucciones de instalacion'''
 
 
{|
 
|Pasos:
 
|-
 
|1. Conecta el cable en el GPIO hacia el exterior de la Raspberry Pi
 
|-
 
|2. Descargar la última versión del sistema operativo desde rgb-pi.com
 
|-
 
|3. Formatear una microSD de 8GB o superior en Fat32
 
 
|-
 
|-
|4. Descarga Etcher de etcher.io para grabar la imagen en la SD
+
|1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi
 +
[[File:cable.jpg|320px|border]]
 
|-
 
|-
|5. Grabar la imagen SIN DESCOMPRIMIR en la SD y EXTRAER CON SEGURIDAD
+
|2. We recommend the use of [https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254282109713 this power supply ]as the only one with RGB-Pi approval to avoid  undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.
 +
[[File:Psu2.png|320px|border]]
 
|-
 
|-
|6. Ya podemos insertar la SD en la Pi y conectarla a la TV
+
|3. That's all! For instructions on how to install RGB-Pi OS, please visit [[OS_Installation|OS Installation]]
 
|-
 
|-
 
|}
 
|}

Revision as of 10:29, 16 October 2020

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

Cable.jpg

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.

Psu2.png

3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation