Difference between revisions of "RGB-Pi SCART Installation"

From RGB-Pi Wiki
Jump to: navigation, search
Line 6: Line 6:
 
[[File:cable.jpg|320px|border]]
 
[[File:cable.jpg|320px|border]]
 
|-
 
|-
|2. We recommend the use of [https://www.ebay.es/itm/3A-5V-Micro-USB-AC-Adapter-DC-Wall-Power-Supply-Charger-for-Raspberry-Pi-Switch/382839263391?ssPageName=STRK%3AMEBIDX%3AIT&var=651535380284&_trksid=p2057872.m2749.l2649 this power supply ]as the only one with RGB-Pi approval to avoid  undervoltages and slowdowns.
+
|2. We recommend the use of [https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F254282109713 this power supply ]as the only one with RGB-Pi approval to avoid  undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.
 
[[File:psu.jpg|320px|border]]
 
[[File:psu.jpg|320px|border]]
 
|-
 
|-

Revision as of 10:22, 16 October 2020

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

Cable.jpg

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.

Psu.jpg

3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation