Difference between revisions of "RGB-Pi SCART Installation"

From RGB-Pi Wiki
Jump to: navigation, search
(One intermediate revision by the same user not shown)
Line 6: Line 6:
 
[[File:cable.jpg|320px|border]]
 
[[File:cable.jpg|320px|border]]
 
|-
 
|-
|2. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in [[OS_Installation|this wiki]].
+
|2. We recommend the use of [https://www.ebay.es/itm/3A-5V-Micro-USB-AC-Adapter-DC-Wall-Power-Supply-Charger-for-Raspberry-Pi-Switch/382839263391?ssPageName=STRK%3AMEBIDX%3AIT&var=651535380284&_trksid=p2057872.m2749.l2649 this power supply ]as the only one with RGB-Pi approval to avoid  undervoltages and slowdowns.
 +
[[File:psu.jpg|320px|border]]
 +
|-
 +
|3. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in [[OS_Installation|this wiki]].
 
|-
 
|-
 
|}
 
|}

Revision as of 14:15, 8 May 2020

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

Cable.jpg

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns.

Psu.jpg

3. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in this wiki.