Instalación RGB-Pi PLUS

From RGB-Pi Wiki
Revision as of 15:53, 20 June 2021 by ATG (talk | contribs) (Created page with "'''Paso a paso'''")
Jump to: navigation, search
Other languages:
English • ‎español

VideoTutorial

Plus mini.png


Paso a paso

1. If you need to sold the male pins begin putting tin on thecontrary corners of the board and weld first this point to align the pin header, after you can continue welding the rest of contacts.

Points.png

2. Connect the board to te pi in this position, to the outside of the Pi

Posi.png

3. Begin wiring the video pins,, you can use you favorite plug.

Pinout plus.png

4. Create a bundle of cables as seen in the following to be connected to buttons and monitor.

Wiring.jpg

5. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in this wiki.