OS First Boot
The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:
|1. The boot logo will be displayed.|
|2. Wait until the system expands the SD card to its maximum size.|
|3. Wait for the system to reboot.|
|4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected or if you are using the JAMMA board).|
Note: you can maintain any button pressed to skip any button mapping configuration and on the end.
Hotkey: is recommended to be start or select or other button that is not used to play.
|5.Select your language.|
|6. Perform the UI and Screen image adjustments.|
|7. Select the desired skin.|
Note: Classic Purple is the official skin used in RGB-Pi OS v1, and Terra is the official skin created specifically for RGB-Pi v2.
|8. That's all! after finishing the configuration, you'll be presented in the system menu screen.|
|9. Now you need to add games, you can continue on Adding ROMs|