RGB-Pi SCART Installation

From RGB-Pi Wiki

Revision as of 15:10, 9 June 2020 by ATG (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns.

3. That's all! For instructions on how to install RGB-Pi OS, please visit First Boot

Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=RGB-Pi_SCART_Installation&oldid=40398"