Translations:RGB-Pi SCART Installation/2/es

From RGB-Pi Wiki
Revision as of 20:23, 18 June 2021 by ATG (talk | contribs)
Jump to: navigation, search
1. Conecta el cable al GPIO. El cable tiene que mirar hacia el exterior de la Raspberry Pi

Cable.jpg

2. Recomendamos el uso de este adaptador de corriente as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.

Psu2.png

3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation
Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=Translations:RGB-Pi_SCART_Installation/2/es&oldid=40757"