RGB-Pi SCART Installation

From RGB-Pi Wiki
Revision as of 11:29, 16 October 2020 by ATG (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi


2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns because supply 5.25v, If you are from UE, need one plug converter too.


3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation