RGB-Pi SCART Installation

From RGB-Pi Wiki
Revision as of 16:13, 16 June 2020 by ATG (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

Cable.jpg

2. We recommend the use of this power supply as the only one with RGB-Pi approval to avoid undervoltages and slowdowns.

Psu.jpg

3. That's all! For instructions on how to install RGB-Pi OS, please visit OS Installation