RGB-Pi SCART Installation

From RGB-Pi Wiki

Revision as of 15:07, 2 May 2020 by RTomas (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Steps

1. Connect the cable to the GPIO. The cable must be facing to the outside of the Raspberry Pi

2. That's all! Please, visit the RGB-Pi OS section in this wiki to learn how to install and configure the system.

Retrieved from "https://www.mortaca.com/rgb-pi/wiki/index.php?title=RGB-Pi_SCART_Installation&oldid=40077"