Difference between revisions of "RGB-Pi SCART Installation"
m (Protected "Instrucciones de instalación Scart" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
m |
||
| Line 1: | Line 1: | ||
| − | + | '''RGB-Pi SCART installation instructions''' | |
| − | |||
| − | '''RGB-Pi | ||
{| | {| | ||
|Steps: | |Steps: | ||
|- | |- | ||
| − | |1. Connect the cable | + | |1. Connect the cable in the GPIO facing to the outside of the Raspberry Pi |
|- | |- | ||
|2. Download the latest version of the operating system from rgb-pi.com | |2. Download the latest version of the operating system from rgb-pi.com | ||
|- | |- | ||
| − | |3. | + | |3. Grab any 8GB or greater MicroSD card (all content will be deleted) |
|- | |- | ||
|4. Download Etcher from etcher.io to write the image in the SD | |4. Download Etcher from etcher.io to write the image in the SD | ||
|- | |- | ||
| − | |5. Burn the image WITHOUT DECOMPRESSING in the SD and | + | |5. Burn the image '''WITHOUT DECOMPRESSING''' in the SD and perform a '''SAFE EXTRACTION''' |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | ''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
| − | |6. | + | |6. You can now plug the SD into the Raspberry Pi, connect to the TV, and power on. |
|- | |- | ||
|} | |} | ||
Revision as of 20:52, 26 April 2020
RGB-Pi SCART installation instructions
| Steps: |
| 1. Connect the cable in the GPIO facing to the outside of the Raspberry Pi |
| 2. Download the latest version of the operating system from rgb-pi.com |
| 3. Grab any 8GB or greater MicroSD card (all content will be deleted) |
| 4. Download Etcher from etcher.io to write the image in the SD |
| 5. Burn the image WITHOUT DECOMPRESSING in the SD and perform a SAFE EXTRACTION |
| 6. You can now plug the SD into the Raspberry Pi, connect to the TV, and power on. |
