Difference between revisions of "RGB-Pi PLUS Installation"

From RGB-Pi Wiki
Jump to: navigation, search
Line 14: Line 14:
 
|4. Create a bundle of cables as seen in the following to be connected to buttons and monitor.
 
|4. Create a bundle of cables as seen in the following to be connected to buttons and monitor.
 
[[File:Wiring.jpg|320px|border]]
 
[[File:Wiring.jpg|320px|border]]
 +
|-
 +
|5. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in [[OS_Installation|this wiki]].
 
|}
 
|}

Revision as of 01:26, 6 August 2020

Steps

1. If you need to sold the male pins begin putting tin on thecontrary corners of the board and weld first this point to align the pin header, after you can continue welding the rest of contacts.

Points.png

2. Connect the board to te pi in this position, to the outside of the Pi

Posi.png

3. Begin wiring the video pins,, you can use you favorite plug.

Pinout plus.png

4. Create a bundle of cables as seen in the following to be connected to buttons and monitor.

Wiring.jpg

5. That's all! For instructions on how to install RGB-Pi OS, please visit the corresponding section in this wiki.