OS First Boot

From RGB-Pi Wiki
Revision as of 15:07, 9 June 2020 by ATG (talk | contribs)
Jump to: navigation, search

The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:

1. The boot logo will be displayed.

01 boot 4.png

2. Wait until the system expands the SD card to its maximum size.

01 expand 01.png

3. Wait for the system to reboot.

01 expand 02.png

4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected or if you are using the JAMMA board).
Note: you can maintain any button pressed to skip any button mapping configuration and on the end.
Hotkey: is recommended to be start or select or other button that is not used to play.

01 mapping.png

5.Select your language.

01 lang.png

6. Perform the UI and Screen image adjustments.

01 ui position.png01 game pos.png

7. Select the desired skin.
Note: Classic Purple is the official skin used in RGB-Pi OS v1, and Terra is the official skin created specifically for RGB-Pi v2.

01 skin.png

8. That's all! after finishing the configuration, you'll be presented in the system menu screen.

01 systems.png

9. Now you need to add games, you can continue on Adding ROMs