OS First Boot
The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:
1. The boot logo will be displayed. |
2. Wait until the system expands the SD card to its maximum size. |
3. Wait for the system to reboot. |
4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected). Note: you can maintain any button pressed to skip any button mapping configuration. |
5.Select your language. |
6. Perform the UI and Screen image adjustments. |
7. Select the desired skin. Note: Classic Purple is the official skin used in RGB-Pi OS v1, and Terra is the official skin created specifically for RGB-Pi v2. |
8. That's all! after finishing the configuration, you'll be presented in the system menu screen. |