Difference between revisions of "OS First Boot"

From RGB-Pi Wiki
Jump to: navigation, search
Line 12: Line 12:
 
[[File:01_expand_02.png|border]]
 
[[File:01_expand_02.png|border]]
 
|-
 
|-
|4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected).<br>'''''Note''': you can maintain any button pressed to skip any button mapping configuration.''
+
|4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected).<br>'''''Note''': you can maintain any button pressed to skip any button mapping configuration and on the end.''<br>'''Hotkey''': is recommended to be start or select or other button that is not used to play.''
 
[[File:01_mapping.png|border]]
 
[[File:01_mapping.png|border]]
 
|-
 
|-

Revision as of 05:10, 13 May 2020

The following points describe the steps to be performed after powering on your Raspberry for the first time, when using a new copy of the RGB-Pi OS:

1. The boot logo will be displayed.

01 boot 4.png

2. Wait until the system expands the SD card to its maximum size.

01 expand 01.png

3. Wait for the system to reboot.

01 expand 02.png

4. Perform the joystick button mapping following the on screen instructions (this screen won't be displayed if there is not any joystick connected).
Note: you can maintain any button pressed to skip any button mapping configuration and on the end.
Hotkey: is recommended to be start or select or other button that is not used to play.

01 mapping.png

5.Select your language.

01 lang.png

6. Perform the UI and Screen image adjustments.

01 ui position.png01 game pos.png

7. Select the desired skin.
Note: Classic Purple is the official skin used in RGB-Pi OS v1, and Terra is the official skin created specifically for RGB-Pi v2.

01 skin.png

8. That's all! after finishing the configuration, you'll be presented in the system menu screen.

01 systems.png